series e (esd/eft) transient protected connectors spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 181 filtered connectors these fully integrated connectors and adapters provide protection from electro static discharge (esd) and electronically fast transients (eft) that can damage or even destroy your equipment. the connectors are designed to meet various iec 61000-4-21, en 61000-4-2 and iec 61000-4 standards, and are offered in a wide range of clamping voltages to fit your specific application. the connectors have integrated esd transient voltage suppressors from littelfuse , are available in industry standard sizes and are ?rop in replacements for unprotected connectors. they are available with various capacitance levels to condition your signals to handle emi issues at the same time or with as little as a 0.05 pf to protect the integrity of your signal in high speed or digital applications. features esd/eft protection at the i/o ports prevents the transients from entering the system before they can cause harm or create emi problems. low ground impedance the metallic shell provides minimal impedance to direct the damaging transient spikes to ground, which is essential for proper protection. removal of ground traces from the board this eliminates potential line-to-line noise problems and spark-overs between ground and signal lines. complete protection all lines, including ground lines, have bi-directional protection. efficient space utilization standard footprints save valuable board space in terms of not only components, but also extra ground traces. fewer components reduces total number of components purchased, stocked, placed and tested; yielding the savings of all the hidden costs involved in these activities, while reducing your supplier base. available capacitance available with various capacitance values to supply low pass properties along with the transient protection, thus supplying esd/eft and emi protection all in one complete package. the metal shell also provides emi shielding of system. parts are available with capacitance values less than 50 pf for digital and very high speed signal lines. mechanical specifications front shell . . . . . . . . . . . steel, tin plated housing . . . . . . . . . . . . . 94v-0 rated thermoplastic, black eyelets . . . . . . . . . . . . . . brass, tin plated threaded inserts . . . . . . . zinc boardlocks . . . . . . . . . . . copper alloy, tin-lead plated pin contacts . . . . . . . . . brass socket contacts . . . . . . . phosphor bronze contact plating . . . . . . . duplex plated as follows: 15uin (.38um) . . . . . . . . . . . . . . . . . . . gold on mating end, with entire contact . . . . . . . . . . . . . . . . . . . 50uin (1.27um) min. nickel underplated . . . . . . . . . . . . . . . . . . . and flash gold finish. current rating . . . . . . . . 5 amp per pin operating temp . . . . . . . -55? to +125? time voltage typical time-voltage curve of transient spike on integrated protected connector with capacitance (parts with working voltage code starting with 0) esd transient spike waveform system voltage limit clamping voltage clamped waveform time voltage potential voltage overshoot voltage voltage across connector clamp voltage current through connector peak current esd event protection trigger typical time-voltage curve of low capacitance integrated protection (parts with working voltage code starting with p) typical time-voltage curves *1566 printer 171-241 v2 12/4/06 9:42 am page 8
spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 182 series e (esd/eft) transient protected connectors filtered connectors ordering information example: 56-e04-005-5-t 56 - e 0 4 - 005 - 5 - t integrated d-sub connectors series e (esd/eft) connectors shell size/ number of contacts 0- 9 size 1- 15 size 2- 25 size 3- 37 size contact type/termination 1 - pin to solder cup 2 - pin to right angle 3 - socket to straight pcb 4 - socket to right angle 5 - adapter (pin to socket) 6 - socket to solder cup 7 - pin to straight pcb working voltage code see table below. (use 3-digit code that matches your electrical requirements) mounting or hardware options _- .120 thru-hole and 15? gold 3g - 30? gold 5g - 50? gold sc and straight pcbs (only) tib - 4-40 thread on rear of flange tif - 4-40 thread on front of flange mib - m3 thread on rear of flange gbl6 - for .062" boards js - jack screws right angles and adapters (only) _- no gbl attached gl - includes grounding board lock t- 4-40 threads gb - no board locks j- jack screws m- m3 thread gj - gl and jack screws footprint (right angle connectors only) 3 - .318" 4 - .405" 5- .590" this part number represents a series e connector with a shell size of 9 and a socket to right angle configuration. the maximum working voltage is 5.5 vdc and the connector has a .590" footprint with 4-40 threads. notes: consult factory for custom capacitance values. typical leakage at 25? is <25 ? maximum leakage 50 ? at v m(dc) transient voltage protection with capacitance immunity to iec 61000-4-2 (esd) up to level 4 and iec 61000-4-4 (eft) air and contact discharge specifications. max. working voltage working voltage code 003 005 009 012 014 018 026 030 3.5 5.5 9.0 12.0 14.0 18.0 26.0 30.0 >30.0 2.5 4.0 6.5 9.0 10.0 14.0 20.0 25.0 >25.0 10.0@5a 15.5@5a 20.0@2a 25.0@2a 30.0@5a 40.0@5a 58.0@5a 65.0@2a 120 120 40 40 120 120 100 30 5 (3.7-7.0) 8 (7.1-9.3) 12 (11-14) 16 (14-18.5) 18 (15.9-20.3) 25 (22-28) 34 (29.5-38.5) 42 (37-46) 0.3 0.3 0.1 0.1 0.3 0.3 0.3 0.1 2200 1600 450 350 480 450 190 80 clamp voltage 8 x 20 s peak current 8 x 20 s energy (j) 10 x 100 s typical cap. pf at 1 mhz v breakdown 1 ma vdc vac please consult factory for availability transient voltage protection without significant capacitance immunity to iec 61000-4-2 (esd) up to level 4 air and contact discharge. excellent for digital, high speed and high frequency si gnals. max. working voltage (v) dc working voltage code p24 24.0 150.0 80.0 <1.0 na 0.05 pf clamp voltage maximum leakage (a) current typical cap. at 1 mhz dimensions in inches (mm) .109 (2.77) .054 (1.385) .043 (1.09) .120 (3.05) .590 (14.99) .112 (2.84) .315 (8.00) b .315 (8.00) board layouts .590" footprint typical layout - top view dimensions in inches (mm) .109 (2.77) .054 (1.385) .043 (1.09) .120 (3.05) .112 (2.84) .056 (1.42) .318 (8.08) a .405 (10.20) or .318" and .405" footprint typical layout - top view shell b size .005 (0.13) .984 9 (24.99) 1.312 15 (33.32) 1.852 25 (47.04) 2.500 37 (63.50) shell a size .005 (0.13) .984 9 (24.99) 1.312 15 (33.32) 1.852 25 (47.04) 2.500 37 (63.50) 1000 trigger voltage typical *1566 printer 171-241 v2 12/4/06 9:42 am page 9
series e (esd/eft) transient protected connectors spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 183 filtered connectors pin contact (plug) straight pc mount 90? pc mount socket contact (receptacle) straight pc mount size a b c d 9 1.213.015 .984.005 .667.010 .755 (30.810.38) (24.990.13) (16.920.25) (19.18) 15 1.541.015 1.312.005 .994.010 1.083 (39.140.38) (33.320.13) (25.250.25) (27.51) 25 2.088.015 1.852.005 1.534.010 1.614 (53.040.38) (47.040.13) (38.960.25) (41.00) 37 2.73.015 2.50.005 2.18.010 2.27 (69.320.38) (63.500.13) (55.420.25) (57.71) footprint e f .318 .430 .318 (10.92) (8.08) .405 .517 .405 (13.13) (10.29) .590 .700 .590 (17.83) (14.99) size a b c d 9 1.213.015 .984.005 .643.010 .755 (30.810.38) (24.990.13) (16.330.25) (19.18) 15 1.541.015 1.312.005 .971.010 1.083 (39.140.38) (33.320.13) (24.660.25) (27.51) 25 2.088.015 1.852.005 1.511.010 1.614 (53.040.38) (47.040.13) (38.380.25) (41.00) 37 2.73.015 2.50.005 2.16.010 2.27 (69.320.38) (63.500.13) (54.840.25) (57.71) footprint e f .318 .430 .318 (10.92) (8.08) .405 .517 .405 (13.13) (10.29) .590 .700 .590 (17.83) (14.99) 90? pc mount c .055 (1.385) ty p. b a ? .12 (3.05) .011 (2.84) .33 (8.36) .50
spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 184 series e (esd/eft) transient protected connectors filtered connectors e d c .329 (8.36) .500 .015 (12.70 0.38) .250 (6.35) ty p. a ?.12 (3.05) .311 (7.90) .520 (13.31) b .241 .006 (6.12 0.15) shell with grounding inserts shell pin contact (plug) solder cup termination socket contact (receptacle) solder cup termination pin - socket adapter dimensions in inches (mm) dimensions in inches (mm) d .24 .006 (6.00 0.15) .039 .010 (0.99 .25) .053 (1.34) .42 .010 (10.72 0.25) e c .055 (1.385) ty p. b a ?.12 (3.05) .011 (2.84) .33 (8.36) .50 .010 (12.55 .25) e f d .24 .006 (6.00 0.15) .039 .010 (0.99 .25) .053 (1.34) .42 .010 (10.72 0.25) e e f c .055 (1.385) ty p. b a ?.12 (3.05) .011 (2.84) .32 (7.90) .50 .010 (12.55 .25) size a b c d e f 9 1.213?015 .984?005 .643?010 .755 .16 .16 (30.81?.38) (24.99?.13) (16.33?.25) (19.18) (4.06) (4.06) 15 1.541?015 1.312?005 .971?010 1.083 .16 .16 (39.14?.38) (33.32?.13) (24.66?.25) (27.51) (4.06) (4.06) 25 2.089?015 1.852?005 1.511?010 1.615 .16 .16 (53.04?.38) (47.04?.13) (38.38?.25) (41.00) (4.06) (4.06) 37 2.73?015 2.50?005 2.16?010 2.27 .16 .16 (69.32?.38) (63.50?.13) (54.84?.25) (57.71) (4.06) (4.06) size a b c d e 9 .642 .233?006 1.213?015 .984 .667 (16.31) (5.92?15) (30.81?38) (24.99) (16.94) 15 .970 .233?006 1.541?015 1.312 .995 (24.64) (5.92?15) (39.14?38) (33.33) (25.27) 25 1.511 .228?006 2.088?015 1.852 1.532 (38.38) (5.80?15) (53.04?38) (47.05) (38.92) 37 2.158 .228?006 2.729?015 2.500 2.183 (54.82) (5.80?15) (69.32?38) (63.50) (55.45) *1566 printer 171-241 v2 12/4/06 9:42 am page 11
|
